Frequently Asked Questions

We handle HT cables up to 33kV and LT cables of all common sizes, including aluminium and copper conductor types.

Yes. We provide underground cable laying in trenches and ducts as well as overhead installations on poles and cable trays.

We use heat shrink and cold shrink jointing systems with terminations prepared to manufacturer and utility specifications.

Yes. We perform insulation resistance, continuity and HV withstand testing before energization and provide test reports.

Yes. We prepare drawings and coordinate route approvals, trench clearances and utility requirements where applicable.

We execute transformer foundations, equipment plinths, substation buildings, cable trenches, earthing systems and lightning protection for electrical installations.

Yes. We prepare foundation designs, structural drawings and general arrangement layouts as part of the service.

Yes. We design and install complete earthing grids and lightning protection systems to IS and IEC standards with testing.

Yes. We undertake extensions, upgrades and rehabilitation of civil infrastructure within live facilities.

Yes. We coordinate civil and electrical works as a single integrated service for smooth, timely project delivery.

Yes. We design HT/LT distribution, metering and panel systems for buildings, complexes and campuses of all sizes.

Yes. We design and integrate DG backup, UPS and changeover systems to protect critical loads and business continuity.

We plan installations in phases, coordinate with operations, and sequence energization to keep buildings running.

Yes. We deliver automation panels, metering and monitoring systems that support intelligent building operation.

Yes. We provide preventive, predictive and breakdown maintenance under flexible AMC packages for buildings and campuses.

We design and build LT distribution panels, PCC panels, MCC panels, APFC panels and PLC-based automation panels for a wide range of industrial and commercial applications.

We offer both. Standard panels are fabricated and wired in our workshop, while site-specific or large panels can be built, wired and tested directly at your facility.

We use certified switchgear and components from leading brands, selected to match your load, protection and budget requirements.

Yes. We provide complete installation, termination, wiring and testing at site, including coordination with the power source and downstream loads.

We carry out insulation resistance, continuity, polarity, functional and operational tests, followed by safe energization and complete documentation.

We provide panel design, busbar design, component selection, wiring schematics, cable schedules and electrical engineering calculations.

Yes. We deliver drawings in standard CAD formats along with PDF copies for submission and reference.

Yes. We design panels to IS, IEC and client or utility requirements with proper protection and coordination.

Yes. We prepare complete cable schedules, BOMs and component lists to support procurement and fabrication.

Yes. We carry out design audits, optimization and re-engineering of existing systems for performance and cost.

We provide SEB liaisoning for new connections, load increases, HT connections and statutory approvals across Electricity Boards.

Yes. We prepare single line diagrams, GA drawings and supporting layouts to the formats required by the Electricity Board.

Timelines vary by board and scope, but our disciplined follow-up and complete documentation help keep the process on track.

Yes. We manage solar liaisoning, evacuation approvals and net-metering applications end to end.

We prepare applications, drawings, undertakings and supporting records required for Electrical Safety approval.

Our service covers the complete HT lifecycle — design, supply, installation, testing and commissioning of panels, switchgear, transformers and substations up to 33kV and above.

We offer both. We can supply quality HT equipment along with full installation, or undertake installation-only projects using client-supplied equipment.

We serve industrial plants, manufacturing units, commercial buildings, infrastructure projects, solar power plants and utility substations.

Yes. We prepare technical drawings and liaise with Electricity Boards and statutory authorities to obtain the required approvals and power sanctions.

We carry out pre-commissioning tests, protection and relay coordination, insulation and contact resistance checks, followed by safe energization and complete documentation.

We provide topographical, DGPS, total station, contour, route, alignment, boundary, utility and engineering layout surveys across infrastructure and industrial projects.

Using DGPS, RTK GPS and total station technology, we deliver centimetre-level accuracy suited to engineering design and construction layout.

Yes. Our mobile survey crews and drone capability allow efficient, accurate surveys of large, remote and difficult-to-access sites across India.

Yes. We prepare CAD maps, contours, cross-sections, alignment and layout drawings directly from validated field data, ready for engineering use.

Yes. We support power projects, transmission lines, solar and wind farms, roads and industrial parks with route, alignment, terrain and layout surveys.

We provide GIS mapping for asset digitization, utility networks, infrastructure and land parcels — delivered as accurate, layered spatial data ready for planning and decision-making.

Power distribution, solar parks, industrial plants, government projects and utility networks benefit from our GIS mapping, spatial analysis and decision-support deliverables.

Our GIS data is built from high-accuracy GPS surveys and validated against field and reference data, delivering engineering-grade positional accuracy.

Yes. We deliver GIS data in standard formats and schemas that integrate with your asset management, planning and operations platforms.

Yes. We provide documentation, training and ongoing support so your team can confidently use and maintain the GIS deliverables.

Yes. We have the team, systems and track record to deliver large-scale electrical works across multiple sites and phases.

We coordinate closely with civil, architectural and other disciplines to sequence works and keep the construction schedule on track.

Yes. Our team prepares drawings and manages approvals, sanctions and coordination with utilities and authorities.

We apply structured quality control, inspection and documentation at every stage, consistent across all project locations.

Yes. We design distribution and substation capacity with headroom for future load growth and scalability.

Yes. We plan and execute upgrades and maintenance within operating plants with minimal production disruption and full safety control.

Yes. We design and build PCC, MCC, APFC and PLC-based automation panels for industrial processes.

Our preventive and predictive programs, priority breakdown response and planned shutdowns keep downtime to a minimum.

Yes. We prepare drawings and manage HT connection, load enhancement and statutory approvals with the Electricity Board.

Yes. We provide power factor correction, load analysis and efficiency improvements that reduce energy costs.

Our service includes preventive, predictive and breakdown maintenance covering transformers, panels, switchgear, cables and related electrical systems.

Yes. We offer flexible AMC packages with scheduled maintenance visits, priority response, reports and agreed service levels.

AMC clients receive priority response with standby arrangements, ensuring fast fault diagnosis and restoration.

We maintain HT and LT equipment including transformers, panels, switchgear, motors, cables and earthing systems.

Yes. We provide detailed service reports, condition records and recommendations after every visit.

Yes. We deliver substations end to end - civil works, equipment supply, erection, testing and commissioning - with all statutory approvals handled.

Yes. We design and execute evacuation systems, grid-interconnection infrastructure and approvals for solar and wind projects.

Our liaisoning team prepares drawings and manages the complete approval process with Electricity Boards and authorities.

We design protection schemes, earthing and power factor correction, and carry out systematic testing before energization.

Yes. We provide preventive, predictive and breakdown maintenance under flexible AMC packages for substations and networks.

We perform insulation resistance, continuity, polarity, mechanical operation and functional tests as part of pre-energization verification.

Yes. We provide detailed test reports and certificates that document results and compliance with standards.

Yes. We test HT and LT systems including panels, transformers, switchgear, cables and associated equipment.

Yes. We carry out routine, condition-based and acceptance testing on existing installations and equipment.

Yes. We provide complete commissioning support including safe energization, verification and handover documentation.